8/19/2019 Windows 10 Volume 4 Loop
Recently, we covered how to disable the automatic repair feature that starts during the boot process in Windows 10. Our readers asked us what to do if the PC has entered an automatic repair loop. Instead of starting normally, the operating system starts automatic repair every time you start it making it impossible to recover from it. Microsoft has not made it easy to exit this process due to bad changes in Windows 8. Here is what you can do to exit it.
RECOMMENDED: Click here to fix Windows errors and optimize system performance
Usually, Windows starts automatic repair when it fails to boot twice consecutively. But sometimes an error occurs during the repair process making it unable to proceed further and so it gets stuck in a loop. If your PC has entered this state, you obviously cannot access the bootloader settings, which are responsible for starting the repair process. To change it, you need to boot from a bootable recovery media with the appropriate operating system you have installed. The best way to get such media is to create a bootable USB on some other PC. Refer to these articles:
If you have an installation DVD with Windows 10, you can also use it. Note that if your PC has a UEFI BIOS with Compatibility Support Module turned off, then it is also likely to have a GPT disk partition. In that case, the bootable USB media you create will also need to be UEFI drive. If your PC BIOS is non-UEFI or has Compatibility Support Modile turned on, you can create a regular USB with legacy MBR bootloader.
Next, start your PC from the USB stick or DVD. When you see the Install Windows screen, click the link 'Repair Your Computer' at the bottom left:
In the screen titled Choose an option, pick the Troubleshoot item.
On the next screen, select 'Advanced Options'
In the Advanced Options screen, pick the item named 'Command Prompt'.
You will now enter the Windows Recovery Environment. The command prompt will appear. Type the following command:
You will see list of boot options with its {GUID} identifiers. Look for the one containing the line resumeobject.
Note or copy the identifier which contains the resumeobject item and type the following command:
In the above command, substitute {GUID} by the identifier you copied earlier.
So, you just disabled the automatic recovery feature for the installed operating system. It is a good idea to enable the safe mode option while you are running the Recovery Environment. Do it as described in the following article:
How to start Windows 10 in safe mode and access F8 options when it doesn’t boot normally
Finally, perform the drive check manually. Type the following command in the recovery environment:
This will check your file system for errors. It can take a notable amount of time, so be patient.
After chkdsk reports that it has finished, you can reboot your PC and try to start the installed operating system. It should work as expected. If some operating system files are corrupted or damaged, you can try to run the following command before rebooting normally:
That's it.
RECOMMENDED: Click here to fix Windows errors and optimize system performance
On Windows 10, notifications keep you in the loop about things happening around your digital life, and they also alert you of anything in your system that may require your attention. However, each banner that slides out in the bottom-right corner also includes a sound, which can quickly get annoying.
If you're constantly getting notifications and muting the system volume or disabling notifications completely is not the solution, Windows 10 includes at least two ways to turn off the sound while still being able to see toast notifications.
In this Windows 10 guide, we'll walk you through the steps to prevent notifications from playing sound using the Settings app and Control Panel.
How to disable sound for notifications using Settings
If you want to turn off the sound for notifications, you can quickly do this for each application using the Settings app.
After completing the steps, apps you configured won't play sounds, but you'll see a banner in the bottom-right corner, and the notification will continue to be listed in Action Center as they arrive.
The only caveat with this approach is that you need to configure apps individually, which is fine if you're planning to keep a few high-priority apps with sound. However, if you're looking to mute all your apps, the easiest way to do this is to use Control Panel.
How to disable sound for notifications using Control Panel
In the case, you have a lot of apps installed on your system, and you don't want to repeat the steps, you can use Control Panel to turn off sound for all notifications.
Once you completed the steps, you'll continue to get toast notifications and Action Center will work as before, but you'll not get annoyed with the same sound over and over again every time a new notification arrives.
Quick Tip: If the problem is that you're just tired of hearing the same sound (or stopped noticing that same sound because you've gone numb to it), you can use the Control Panel instructions to change the default sound, instead of turning it off. The only thing you need to do is to select a new sound on step No. 5.
More Windows 10 resources
For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:
They must face Organization XIII, protect the Keyblade’s power, and resume their search for the special people they have lost. Jiminy Cricket is looking over the journal he used to document his first adventure with Sora when he discovers a mysterious message. Sora's journey in KINGDOM HEARTS II has drawn to a close, and now a new tale is set to begin.
If your Windows 10 computer is stuck in a continuous endless reboot loop problem after an Upgrade, a Windows Update or Reset or a Blue Screen, then this post gives you some ideas on how to deal with the problem. Before your computer restart, it may or may not display any message; and if it does, it could be any like the following ones:
So if your Windows computer restarts without warning and goes into a reboot loop here are a few things you could try. Please go through the entire posts first, along with the mentioned links, and see which situation may apply to you.
Windows 10 stuck in endless reboot loop
Whatever may be the reason, your priority should be to try and enter Safe Mode. If you can get into Safe Mode, great; else, you will have to use your Windows Installation Media.
First of all, let it reboot a couple of times and see if it sorts itself out. At times, Windows may automatically display the Repair Windows option or start Automatic Repair automatically. But if it continues to reboot, try these suggestions.
1] Rebooting continuously after installing Update, Driver or Program
If you are on a dual-boot system, things are a bit easy. In the dual-boot OS selection screen where you select the OS to boot into, you will see a Change defaults or choose other options.
Select it, then Troubleshoot > Advanced options > Windows Startup Settings.
When Startup Settings open, press 4 on your keyboard to select the Enable Safe Mode option.
This will reboot your PC into Safe Mode.
If you have only a single operating system installed on your computer, then you need to find a way to boot Windows 10 in Safe Mode. The options include:
If you had already enabled the F8 key earlier, things are easier as you press F8 while booting, to enter Safe Mode.
If you cannot enter Safe Mode, then you may then have to boot into Windows 10 with your Windows Installation Media or Recovery Drive and select Repair your computer to enter Troubleshoot > Advanced Startup Options > Command Prompt. You can now use CMD to run commands. You may use a Windows 10 DVD or a bootable USB drive, or you can burn Windows 10 ISO to a USB drive using another computer.
Well, in either case, once you have got out of the reboot loop and entered Safe Mode or accessed the Advanced Options, you have the following options:
If you entered Safe Mode you may:
Windows 10 Volume 4 Loop System
The following options are available to you if you have entered Safe Mode or accessed Advanced Startup options:
If you wish, you can also prevent Windows from restarting after Windows Updates by using the Group Policy or Registry Editor.
2] Continuous restart due to Hardware failure
Hardware failure or system instability can cause the computer to reboot continuously. The problem could be the RAM, Hard Drive, Power Supply, Graphics Card or External devices: – or it could be an overheating or BIOS issue. This post will help you if your computer freezes or reboots due to Hardware issues. You will have to be in Safe Mode to be able to make changes.
3] Reboot after Blue Screen or Stop Error
To prevent a software or driver issue from restarting your computer repeatedly after a Stop Error, do the following. You need to do this so that you can read the error code, which in turn can help you troubleshoot the issue. You will have to be in Safe Mode to be able to make changes.
Using the WinX Menu of Windows 10, open System. Next click on Advanced system settings > Advanced tab > Startup and Recovery > Settings. Uncheck the Automatically restart box. Click Apply / OK and Exit.
Alternatively, open Registry Editor and navigate to the following key:
Here create or edit a DWORD named AutoReboot, and set its value as 0.
Now if your Windows were to crash due to a Stop Error, it will not restart the computer but will display the error message, which can help you troubleshoot the Blue Screen.
4] Reboot loop after an Upgrade
This post will help you if Windows Upgrade fails and goes into a restart loop.
Malware or virus infection could also be a possible cause for your computer restarts. Deep scan your computer with your antivirus software. You may want to also use a second-opinion on-demand antivirus software to scan your Windows, just to be doubly sure.
Useful read: This post shows you how to access Safe Mode or Advanced Startup Options when Windows 10 is stuck on loading some screen with the spinning dots animation moving endlessly, welcome mode, login screen, starting Windows or will not boot.
All the best!
TIP: Download this tool to quickly find & fix Windows errors automatically
Related Posts:
Sep. 11, 2018 / Updated by Bessie Shaw to Windows 10
The Windows boot loop or restart loop is an annoying computer problem that often bothers the users after the system upgrade or update. We have endless reboot loop after the Windows 10 upgrade and slow boot issue after the Windows 10 Anniversary Update, and now we get stuck on the Windows 10 Creators Update boot loop or reboot issue after Windows 10 Fall Creators Update. Though Windows 10 Creators Update comes with some new features convenient for users to get access to game loading, 3D paint, web page browsing, etc., the update is also reported to cause issues like black screen, reboot loop, no WiFi available or no sound.
In this case, the boot loop often comes with the spinner under the Windows LOGO when you start up the machine or just a black screen with a spinner or things like that. You may boot into the log in screen successfully or get the Windows 10 keeping starting all the time, which makes us quite frustrated.
Top 3 Ways to Fix the Boot Loop on the Windows 10 Creators Update/Fall Creators Update PC
Microsoft has announced users not to download and install the Windows 10 Creators Update (v1703, build number 15063) manually except the automated push in case problems above annoy you day after day. But no one likes to stay with a computer stuck in the endless reboot loop. And today, let's have a close look at how to fix the boot loop issue after the Windows 10 Fall Creators Update/Creators Update. You can try the 3 methods below to troubleshoot the problem.
Note: If you can't enter the desktop, it is better to enter the safe mode to fix the issue:
1. Shut down by hold the power button and then repeat this over 3 times until you see the Recovery screen. Naruto shippuden struggle ninja extreme.
2. Click the buttons See advanced repair options >Troubleshoot >Advanced options >Windows Startup Settings >Restart.
3. Press F4/F5 to Enter Safe Mode (with Networking).
If you have any questions about this, please see: How to Enter Safe Mode to Fix Windows 10 Boot Loop
Now go to the solutions for the endless boot loop problem below:
Way 1. Fix Windows 10 Creators Update Boot Loop by Repairing Corrupted System Files
You can use a handy tool built-in Windows, System File Checker (SFC), which can help you find and fix the corrupted system files on your computer when the Windows 10 keeps restarting because if there are corrupted Windows system files, system problems may occur, such as boot loop, 100% disk usage, blue screen of death (BSoD), random restarts and more. Here’s how to run the SFC /scannow:
1. Launch the Command Prompt (Admin) on the PC.
2. Type into SFC /scannow.
3. Press the Enter.
Then Windows will take a scan. You need to wait until this process is finished. After that, you may see “Windows Resource Protection found corrupt files and successfully repaired them.” on the screen. Then you can restart the PC and enter the desktop of Windows 10 Fall Creators Update/Creators Update.
Way 2. Fix Endless Restart Loop via Updating Drivers
Driver failure can also result in boot loop and other Windows startup issues. Outdated or corrupt graphics drivers, USB 3.0 drivers, network drivers, etc. are known to cause myriad issues in Windows update or installation. If you locate faulty hardware device drivers in the Device Manager, you can use some professional driver troubleshooters, like Driver Talent, to help to download the drivers for Windows 10 Fall Creators Update/Creators Update.
The utility contains the official and WHQL drivers that are best matched to your computer without causing driver signature issues. Click the button above to get Driver Talent directly.
Here's how to update the drivers and fix the reboot problem:
1. Launch Driver Talent and click Scan to detect all the problematic drivers on the Windows 10 Creators Update computer.
2. Click Update to download and install the best-match Windows drivers.
3. Perform a restart to make all the driver changes take effects.
Note: It is better to back up drivers before the driver update in case other system issues occur.
Way 3. Roll Back to the Previous Windows 10 Version and Solve the Boot Loop Problem
If you have updated to the Windows 10 Creators Update from the v1607 or from the Windows 7/8.1, but unfortunately encounter the restart problem, you can go and roll back or downgrade this version to its predecessors.
See Also:How to Downgrade Windows 10 to Windows 8.1, 8 or 7
Note: An intact Windows.old file (stored in C:Windows.old) is the essential precondition for the rollback or downgrade.
1. Use Windows shortcut keysWin + I to launch the Settings.
2. Go to the Update & security menu.
3. Choose the Recovery tab.
Windows 10 Volume 4 Loop 1
4. Go to Advanced startup and click Restart now.
5. Click Troubleshoot.
6. Click the Windows Rollback or Go back to the previous build option.
Then you can choose the version you prefer and follow the on-screen instructions to go back to an earlier or previous build. This can help to resolve the boot loop after the Windows 10 Fall Creators Update/Creators Update.
That’s it. Hope this post is helpful to fix the endless reboot problem on your computer. If Windows 10 still keeps restarting, or if you have any other questions or methods to fix the Windows 10 Creators Update boot loop issue, please reach the comment section below or click the LEFT MENU on this page or go to the OSToto official forum. Any other Windows 10 Fall Creators Update/Creators Update related issues please go to Windows 10 section on this page.
Related Posts:
RECOMMENDED: Click here to fix Windows errors and improve PC performance
Whenever you watch a video or listen to some music, you tend to control the volume of the sound. Now, how do you control the volume? Do you know there are multiple ways of controlling the volume in Windows 10. So, this article will deal with multiple tips to change and control volume in Windows 10.
You can control the volume from your Windows 10 taskbar or using the Volume Mixer from the Control Panel. You can also use your volume keyboard keys to adjust the volume. Now, let us move ahead and explore multiple tips to change and control volume in Windows 10.
You may like to Read:
How to Change or Control Volume in Windows 101. Through Notification Area
2. Through Control Panel
10 Volume Peroxide
3. Through Volume Mixer Shortcut
The easiest way to get the Volume Mixer on the screen is to get it from its launcher. Only one time you have to follow few easy steps to create a Volume Mixer shortcut on your desktop. Then, use the shortcut and with one click, the Volume Mixer window will appear on your screen.
C:WindowsSystem32SndVol.exe and click Next to continue.
4. Through Volume Keys of your Keyboard
You will find Volume control keys on your keyboard. You can use those keys to increase or decrease the volume of your computer. In case you are using a gaming keyboard, you might have this facility. But still, you will be able to configure any key to increase or decrease the volume.
5. Using Volume Sliders of the Speakers
Another way to control the volume is to use the volume sliders of the speakers connected to your computers. This is the quickest way to control the volume and is very useful for the PC users.
6. With Function Key
Commonly F7 and F8 Function keys are assigned to Change and Control Volume on Windows 10. When you press either of the keys you’ll see a volume slider on the upper left of the screen. So you can Press F7 to reduce the sound and F8 oppositely to increase.
Conclusion
So many methods are mentioned in this article to control the volume of your Windows 10 operating system and active applications. Try all of them and use the one which suits you the most. And if you have some other ways of controlling the volume, please let us also know about it.
RECOMMENDED: Click here to fix Windows errors
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |